MORE REACH. LESS STRUGGLE.
Adds back the reach your quick hitch takes away - so your PTO shaft connects faster without smashing your knuckles.
Skip to product information
Restores the Reach
Press. Lock. Done.
Forged in GalvaSteel
Locks tight. Stays put.
Shipping Across the USA
30-Day Risk-Free Trial
Reach 2.0™ - PTO Extender For Tractor
Nobody wants to wrestle a PTO shaft just to hook up a mower. Reach 2.0™ restores the reach with a press-and-lock system. Built from galvanized steel to hold. Full reach, every hookup.
Low stock: 9 left
Shipping Across the USA
30-Day Risk-Free Trial
10,378 Customers Love Ironó
Why farmers pick Reach 2.0™
Cheaper than a new shaft.
No more straining to hook up.
No cutting your PTO shaft.
Got Questions? We’ve Got Answers
Reach 2.0 uses the industry-standard 1-3/8-inch 6-spline connection.
- Female end connects to your tractor's PTO stub
- Male end connects to your implement's driveshaft
The tractor side fits consistently. Confirm your implement uses the same 1-3/8-inch 6-spline standard before ordering.
No cutting required. Maintain proper shaft overlap when fully extended.
Reach 2.0™
Installed In Four Steps
1. Power Down
Turn off the tractor. Let the PTO come to a full stop. Then remove your old extender or coupler and wipe down the connection points so you're working with a clean surface.
2. Grease Up
Apply a light coat of grease to the spline before installing. This reduces wear over time and helps Reach 2.0™ slide into place smoothly instead of forcing it on dry.
3. Press & Lock
Line up the spline, push Reach 2.0™ onto the shaft, and press until you feel the locking plunger click into place. No collar to pull back, no wrestling.
4. Check It's Firm
Give it a firm tug before you power back up. If it holds without shifting, you're locked in and ready to run. That's it. No tools, no second-guessing.
1. Power Down
Turn off the tractor. Let the PTO come to a full stop. Then remove your old extender or coupler and wipe down the connection points so you're working with a clean surface.
2. Grease Up
Apply a light coat of grease to the spline before installing. This reduces wear over time and helps Reach 2.0™ slide into place smoothly instead of forcing it on dry.
3. Press & Lock
Line up the spline, push Reach 2.0™ onto the shaft, and press until you feel the locking plunger click into place. No collar to pull back, no wrestling.
4. Check It's Firm
Give it a firm tug before you power back up. If it holds without shifting, you're locked in and ready to run. That's it. No tools, no second-guessing.
Built For Your Tractor
Kubota
A confirmed fit for Kubota compact and utility models, including the popular 2501. From quick-hitch setups to finish mowers and tillers.
John Deere
Runs smooth on John Deere utility tractors like the 3032, keeping your PTO connection tight and true, hookup after hookup.
New Holland
Seats securely on New Holland PTO stubs, giving you the reach quick-hitch setups take away without any extra fuss.
Any 1-3/8" 6-Spline Tractor
Kubota, Deere, and New Holland are just the start. If your tractor runs a standard 1-3/8" 6-spline PTO, Reach 2.0™ fits right in.
Trusted By
10,378 Customers
See what our customers are saying about their experience
James W.
This PTO extender works great on our tractor and one piece of equipment that we should have always had. It making hooking up the bush hog and other equipment to the tractor PTO very easy and very quick. We just leave it connected to the tractor shaft and it’s always ready to go.
Robert H.
This extension saved me $170 by not requiring me to buy a new PTO shaft.
John M.
Excellent quality, a must-have if using any kind of quick-hitch tractor system. The extender is easy to attach and remove. I used it on my tractor after installing a quick hitch, and I didn’t have to cut my PTO shaft or purchase a longer one. The extender also makes it easier to hook up implements by moving the PTO connection away from the guard, which can be troublesome when attaching an implement. Highly recommend.
Michael B.
Easy to install to the existing PTO on my Kubota L3240. I really like the push pin style lock versus the standard button style on most of my implements. The extra length allowed me to attach a stump grinder that due to the quick hitch I have on the tractor the shaft was a little to short to safely run the equipment. Time will tell how durable this item is but first impressions are that it appears to be sturdy and will serve the purpose I need it for. I would recommend it.
David R.
Purchased for my Kubota LX2602SUHST compact tractor to provide some extra clearance when attaching bush mower PTO shaft. Needed this due to some loss of clearance from the quick hitch. Seems to be well made, and thus far it has worked well. Makes attaching and removing PTO shaft much easier.
Sarah T.
I bought this because Rural King gave me the wrong PTO for my brush cutter, and was a few inches short. This installed easily, and allows the PTO to nest deeper within itself. It also allows the connection and removal of the PTO to occur without bashing up my hands working the coupler. That alone is reason enough to buy this product. It has a nice heft to it, and I think it will last a long time.
IRONÓ Vs. Other PTO Extenders
Ironó
Others
GalvaSteel Rust-Resistant Build
×
Precision 6-Spline Fit
FEW
Checked Weld & Construction
×
Press & Lock Connection
FEW
30-Day Trial + Warranty
×
Reviews
Based on 394 Reviews
J
I bought the Pro extender because I was tired of smacking my wrist on the Pro shaft guard. I was pleasantly surprised by how easy it is to hook up implement drive shafts. I highly recommend
B
Appears to be heavy duty. Fits tractors shaft and implements receiver perfectly. Helps in hooking up as well as extending for quick attach hitch.
W
This 1-3/8" x 6-spline steel PTO extension shaft has an overall length of 6-7/16". The male end is cross-drilled with a 5/16" hole that can be used for shear bolts on various PTO shafts. The male and female ends of the extender fit PTO shafts without issue. It works very well for tractors with a three-point quick-hitch attachment, as its added length compensates for the additional length created by the quick hitch. The extension also provides more working room when attaching a mower or post-hole digger shaft to the tractors PTO shaft. It is a quality item that is easy to use and offered at a competitive price.
G
I purchased the cat. 1 PTO extender for my 96 year-old father-in-law's tractor to make hooking up the PTO shaft easier. I am very satisfied with the purchase and my father-in-law is thankful for the addition.
M
Well made and just what I needed
A
arrived fast & as advertised
W
The extra clearance around the PTO shroud makes a huge difference. Should have bought one sooner.
F
The Irono extender fit snug at first, but after a little grease it slid on properly. Would recomend.
m
The extra clearance around the PTO shroud makes a huge difference. Should have bought one sooner.
K
The extra clearance around the PTO shroud makes a huge difference. Should have bought one sooner.
M
This PTO Extender is perfect. It is very well built. Solid and heavy duty. The best part of this product is having your connection moved out of bell housing which makes connecting a breeze. I would highly recommend this product. Had I realized how much easier it is to connect PTO shaft, I would have bought this a long tome ago. You won't be disappointed with this product!
J
This 1-3/8" x 6-spline steel PTO extension shaft has an overall length of 6-7/16". The male end is cross-drilled with a 5/16" hole that can be used for shear bolts on various PTO shafts. The male and female ends of the extender fit PTO shafts without issue. It works very well for tractors with a three-point quick-hitch attachment, as its added length compensates for the additional length created by the quick hitch. The extension also provides more working room when attaching a mower or post-hole digger shaft to the tractor�s PTO shaft. It is a quality item that is easy to use and offered at a competitive price.
T
Feels like a solid chunk of steel and not a cheap lightweight part. Mine needed a little grease out of the box.
M
I was worried it might add too much length, but the size was just right for my quick hitch setup.
S
Very heavy duty and well made. It costs a little more than some others, but the quality feels worth it.
L
The extra clearance around the PTO shroud makes a huge difference. Should have bought one sooner.
E
Fit was slightly tighter than expected on the implement side, but a small amount of grease solved it.
K
Had to clean some paint or coating from the splines before it fit smoothly, but now it connects perfectly.
T
The extra clearance around the PTO shroud makes a huge difference. Should have bought one sooner.
G
Irono gave me the extra reach I needed after adding a quick hitch. Simple fix and would recomend.
D
I was concerned about vibration from adding an extender, but so far it has run smooth and stayed secure.
M
The extra clearance around the PTO shroud makes a huge difference. Should have bought one sooner.
C
Overall very happy with the Irono extender. Minor fitment effort at first, but it does exactly what I needed.
M
My PTO shaft was just a few inches short and this fixed the problem without any cutting or modifications.
C
I expected installation to be easier, but once the splines were aligned it snapped right into place.
M
The finish had a small scratch when it arrived, but that doesnt affect how it works. Would buy again.
B
I wasnt sure this would work with my older tractor, but it locked on securely and fit better than expected.
T
Works good on my mower setup and saves my hands from reaching behind the PTO guard. Definately recommend.
J
My PTO shaft was just a few inches short and this fixed the problem without any cutting or modifications.
M
Had to clean some paint or coating from the splines before it fit smoothly, but now it connects perfectly.
J
Added exactly the reach I needed. Just check your shaft length first because every setup is different.
C
Exactly what I needed for brush hog!!
Kelsey B.
Screwed up a PTO shaft and had to cut it off making it too short to work safely. They wanted $350 for a new PTO shaft. I tried this extender and it makes up for the 3 inches I cut off. Saved me lots of money. Looks well made and has worked well so far.